Device Parameters; Device Statistics; Network Configuration - Videotec ULISSE Manuel D'instructions

10.1.4 Device Parameters

From menu entry Device Parameters it is possible
to set the name of the pan & tilt and view other
additional information.
Fig. 60

10.1.5 Device Statistics

From menu entry Device Statistics all of the statistics
are gathered during Pan & Tilt operation are provided
in read-only mode.
Fig. 61
34

10.1.6 Network Configuration

From menu entry Network Configuration it is possible
to change the setting of the Pan & Tilt network. It is
possible to decide whether the device requires an
address assigned statically, dynamically with DHCP
or self-generated. The device supports the Internet
Protocol (IP) in version 4.
With self-generated address the device will
automatically assign itself an address in the
range 169.254.0.0/16.
From the same page it is possible to configure 2 DNS
and decide which mechanisms must be enabled
to automatically identify the devices in the local
network.
Fig. 62
MNVCUPT3_1511_EN