Thermal Camera Menu - Videotec MAXIMUS MVXT Manuel D'instructions

6.1.4 Thermal Camera menu

State: Provides access to the sub-menu that
1.
shows the technical information of the thermal
camera.
Spot Meter: Provides access to the measuring
2.
point management sub-menu.
3. Video Setup: Provides access to the video
configuration management sub-menu.
4. Configuration: Allows loading one of the
default configurations of the camera or
enabling advanced configurations (Custom).
• Default: Sets the default configuration of the
thermal camera.
• Low Contrast: Sets the operation mode
designed for low contrast scenes (sea, sky...).
• Indoor: Sets the operation mode designed
for indoor environments.
• Outdoor: Sets the operation mode designed
for outdoor environments.
• Face Definition: Sets the operation mode
designed for face recognition.
• Custom: Allows manual configuration of the
thermal camera. Selecting this configuration
enables menus for advanced configurations.
THERMAL CAMERA THERMAL CAMERA
------------------------ ------------------------
1>STATE 1>STATE
2 SPOT METER 2 SPOT METER
3 VIDEO SETUP 3 VIDEO SETUP
4 CONFIG.: 4 CONFIG.:
Fig. 18
16
> >
> >
> >
DEFAULT DEFAULT
To enable advanced settings select menu
item Custom.
Flat Field Correction: Provides access to the
5.
Flat Field Correction (FFC) and Gain Mode
configuration submenu.
Digital Data Enhancement: Provides access
6.
to the Digital Data Enhancement (DDE)
configuration sub-menu.
7. Automatic Gain Correction: Provides access
to the Automatic Gain Correction (AGC)
configuration sub-menu.
8. Isotherm: Provides access to the Isotherm
mode configuration submenu.
THERMAL CAMERA THERMAL CAMERA
------------------------ ------------------------
1>STATE 1>STATE
2 SPOT METER 2 SPOT METER
3 VIDEO SETUP 3 VIDEO SETUP
4 CONFIG.: 4 CONFIG.:
5 FLAT FIELD CORRECTION> 5 FLAT FIELD CORRECTION>
6 DIGITAL DATA ENHANC. > 6 DIGITAL DATA ENHANC. >
7 AUTOM. GAIN CORRECT. > 7 AUTOM. GAIN CORRECT. >
8 ISOTHERM 8 ISOTHERM
Fig. 19
> >
> >
> >
CUSTOM CUSTOM
> >
MNVCMVXTCAM_2121_EN