Thermal Camera Menu - Videotec Ulisse Compact Manuel D'instructions

8.1.16 Thermal Camera Menu

1. Control: Sets the type of control on the thermal
camera.
• Indoor: The camera configuration is managed
by the pan & tilt.
• Outdoor: The camera configuration is
managed through the serial line RS-485-3
(only for models with double camera).
Configuration: To set one of the preset
2.
configurations of the thermal camera.
• Standard: Sets the standard configuration of
the thermal camera.
• High Gain: Sets the configuration for a
higher-resolution image.
• Isotherm: Sets the configuration for
highlighting objects within a given
temperature range (8.1.16.8 Thermal Analysis
Menu (Isotherm), page 47).
• Custom: Signals that the operator has
manually chosen the configuration of the
thermal camera.
3. Flat Field Correction: Allows access to the Flat
Field correction management submenu.
42
Video Setup: Allows access to the video
4.
configuration management submenu.
Gain control: Allows access to the gain control
5.
management submenu.
ROI Setup: Allows access to the ROI
6.
management submenu.
Thermal Analysis: Allows access to the thermal
7.
analysis management submenu.
Status: Allows access to the submenu
8.
containing the technical features of the thermal
camera.
THERMAL CAMERA
------------------------
1>CONTROL
2 CONFIG.
3 FLAT FIELD CORRECTION>
4 VIDEO SETUP
5 GAIN CONTROL
6 ROI SETUP
7 THERMAL ANALYSIS
8 STATUS
Fig. 77
: INTERNAL
: STANDARD
>
>
>
>
>
MNVCUCT_1511_EN