Emc / Technical Description - Medela Lactina Mode D'emploi

12. EMC / Technical description

The Lactina breastpump needs special precautions regarding EMC (Electromagnetic
compatibility) and needs to be installed and put into service according to the EMC
information provided in these instructions for use.
Wireless communications equipment such as wireless home network devices, mobile
phones, cordless telephones and their base stations, walkie-talkies can affect the
electric breastpump Lactina and should be kept at least a distance 1.0 m away from
the equipment.
Electromagnetic Compatibility (EMC, IEC 60601-1-2:2007, Table 1)
Electromagnetic emissions
The electric breastpump Lactina is intended for use in the electromagnetic environment
specified below. The customer or the user of the electric breastpump Lactina should assure
that it is used in such an environment.
Emission tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Warning – The electric breastpump Lactina should not be used adjacent to
or stacked with other equipment. If adjacent or stacked use is necessary,
164
the electric breastpump Lactina should be observed to verify normal operation
in the configuration in which it will be used.
Electromagnetic environment –
Compliance
guidance
The electric breastpump Lactina uses RF energy
only for its internal function. Therefore, its RF
Group 1
emissions are very low and are not likely to cause
any interference in nearby electronic equipment.
Class B
The electric breastpump Lactina is suitable for
use in all establishments, including domestic
Class A
establishments and those directly connected to
the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Complies