Preparing For Pumping; Assembling The One-Day Pump Set - Medela Lactina Mode D'emploi

6. Preparing for pumping

Caution
18
l Wash hands thoroughly (at least one
minute) with soap and water before
touching the breast, clean pump parts
and clean pump set.
Note
l The One-Day Pump Set is supplied
Ready-to-Use and does not need
cleaning prior to first use.
l The reusable pump set needs cleaning
prior to first use. Please see chapter 5.2.
l Use Medela original accessories only.
l Check pump set components for wear
or damage before use.
l All components must be completely dry
before usage.
i
Info
l Carry out all the steps with care and
assemble the pump set correctly.
Otherwise a good vacuum may not be
achieved.
6.1 Assembling
the One-Day Pump Set
1
Open the packaging of the
Ready-to-Use pump set.
Add a disposable bottle as
required (35/80/150/250 ml).
4
Insert the tubing onto the
corresponding part of the
connector.