Memory Card - Spypoint TINY-WBF Manuel D'utilisation

Masquer les pouces Voir aussi pour TINY-WBF:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

12
SD card slot
Batteries
compartment
12 volt connection
AA batteries
The receiver requires the use of 6 AA batteries (1.5V). The
use of alkaline or lithium batteries is strongly recommended.
Insert the batteries as indicated. Exact polarity must be
followed. We also recommend the use of new batteries to
ensure maximum performance of the receiver.
External (12V)
The receiver can be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/ BATT-12V/
KIT6V-12V, sold separately) or a 12-volt adapter
(AD-12V, sold separately). To find the accessories available,
see OPTIONS.
Solar panel
The receiver can be powered with a 12-volt battery combined
with a solar panel SP-12V (sold separately, see OPTIONS) to
maintain the charge of the 12-volt battery (sold separately,
see OPTIONS).
TEST LIGHT
ON/OFF
(bottom view)

MEMORY CARD

Using a memory card (sold separately, see OPTIONS) is
required to operate both the TINY-W
BLACKBOX
receiver. When the camera is turned on, the
TM
screen displays Insert memory card in PHOTO, VIDEO
or TEST mode if no memory card is used, the camera also
beeps. The camera supports a 32GB memory capacity, the
receiver supports 8GB. Before inserting or removing the
memory card, the camera or the receiver must be turned
off. Failing to do so may cause loss of pictures or damage
the pictures already recorded on the memory card. When the
SD card is full in the camera, the viewing screen indicates
Disk full when PHOTO, VIDEO or TEST mode are selected.
When the SD card is full in the receiver, the transmission and
recording of images continues by clearing the first photos on
the memory card. The following data shows an approximate
quantity of photos or video length that can be taken by the
camera depending on the memory card capacity.
RESOLUTION
2.0 GB
3 MP
2000
5 MP
1700
8 MP
1200
VIDEO RESOLUTION
640 x 480
65 min
"BUSY" LED
The "BUSY" light, located beside the LCD screen, lights up
when the camera records a file.
camera and the
BF
4.0 GB
8.0 GB
32 GB
4100
8200
32800
3400
6800
27300
2400
4800
19000
2h10
4h10
16h40
13

Publicité

Table des Matières
loading

Table des Matières