Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
20
Turn OFF the camera. Press and hold the
button and turn the camera ON. "10sec
enabled" appears on the screen meaning
the minimum delay is now 10 seconds. If
this option is used, the 30 minute delay
disappears. To reset the camera to 1 minute
delay, follow the same procedure. "10sec
disabled" appears on the screen (see figure
below)
10SEC ENABLED
10 sec delay
Multi-shot:
Take up to 6 consecutive shots at each
(1/2/3/4/5/6
detection, with a 10 second delay between
consecutive
each photo. This option allows up to 6
shots)
pictures from different angles when the
camera is in PHOTO mode.
Video length:
Allow the user to select the recording time
(10s/30s/60s/90s)
when the camera is set in VIDEO mode.
Language:
Select a language for the camera menus.
(English/
Français/Deutsch/
Italiano)
10SEC DISABLED
1 min delay
Sensitivity:
Allow the user to choose between three
(High/Medium/
different levels of sensitivity: "HIGH",
Low)
"MEDIUM" or "LOW". The camera will
only detect sources of heat in movement.
Make sure to have the least possible
objects in front of the camera during the
positioning. This prevents picture taken
by the camera when oriented towards the
sun while an object moves in front of the
camera (e.g. a branch).
Date:
Set the date as Month / Day / Year
Time format:
Allow the user to choose between a 12 or
(12h/24h)
24 hours period time displays on the photos
(eg. 6:00 pm or 18:00)
Time:
Set the time as Hour / Minute
Stamp:
Select or cancel date, time, temperature and
(Yes/No)
moon phases stamp on photos.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
21
Publicité
Table des Matières
