Spypoint TINY-WBF Manuel D'utilisation page 6

10
TO INSERT THE BATTERY CASE INSIDE THE CAMERA
Connector
External (12V)
This camera can also be powered from an external 12-volt
DC input such as a 12-volt battery (KIT-12V/ BATT-12V/
KIT6V-12V, sold separately) or a 12-volt adapter (AD-12V,
sold separately). During the installation of 12-volt battery,
slide the switch inside the battery case to ALK (the AA
batteries can remain safely inside the camera). If combined
with a lithium battery pack, slide the switch to RECH. For
the accessories available, see OPTIONS.
SPY SPY P P INT INT
TINY-W BF
Connector
SPY SPY P P INT INT
TM
Solar panel
This camera also offers the possibility of a connection
to a solar panel SP-12V (sold separately, see OPTIONS)
to maintain the charge of the lithium battery pack (sold
separately, see OPTIONS) or the 12-volt battery (sold
separately, see OPTIONS). During the installation of the
rechargeable lithium battery pack or 12-volt battery, slide
the switch inside the battery case to RECH to activate the
charging system of the solar panel.
Power source
• 6 AA
• 12V
• 12V + 6 AA
• LIT-09
• 12V + LIT-09
• Solar Panel + LIT-09
POWER (BLACKBOX
TM
It is possible to know the battery level of the receiver when it
is turned on. The TEST LIGHT stays on for 8 seconds when
the batteries are full. When the TEST LIGHT flashes for 8
seconds, the batteries are low and need to be replaced. If
the TEST LIGHT remains off, the batteries are completely
empty or are possibly installed in the wrong direction.
Switch position
ALK
RECH
RECEIVER)
11