Memory Card - Spypoint IR-A Manuel De L'utilisateur

All manuals and user guides at all-guides.com
24 25

MEMOrY CArD

The SD slot in the SPYPOINT camera model IR-A can accept
optional SD memory cards up to 8GB. Before inserting or
removing the memory card, the camera MUST be turned off.
Failing to do so may cause loss of photos or damage to the
memory card. When the internal memory or the SD card is full,
the LCD panel will show "FULL". The following data shows
an approximate quantity of photos that can be recorded by the
camera depending on the memory card capacity.
SETTINGS
Picture Quality, Date and Time
Turn off your camera, set the mode switch to "Test" and set the
power switch to "ON". Press "MENU" once. The default setting
"H" (6MP) icon will flash. Use "DOWN" if you want to change
to "L" resolution (3MP). Press "MENU" button to set date and
time. Use "UP" and "DOWN" to change the blinking number.
Press "MENU" to set next option. Press "OK" and turn off the
system to record the changes. The camera's internal memory
(32MB) can store approximately 46 pictures in 3MP mode (low
resolution) and 22 pictures in 6MP mode (high resolution). The
SD slot accepts optional SD card to record more pictures.