16.3
Short-term centrifugation
Press the key to activate the RPM display
(RPM) or the RCF display ( RCF ) as
RCF
needed. The LED above the key is
illuminated if the RCF display ( RCF ) is
activated.
Input the desired centrifugation parameters (see the
"Programming" chapter).
Press the key and keep it pressed.
START
PULSE
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.
Release the key again.
START
The centrifugation run is ended.
PULSE
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example
7.
17
Emergency Stop
Press the key twice.
STOP
OPEN
During the Emergency Stop, the run-out
occurs at brake stage 9 (shortest run-out
time). Brake stage
AB1101DEENFRIT
Example:
RPM display (RPM)
PROG
PROG
PROG
PROG
Example:
RPM display (RPM)
PROG
9 is displayed.
Rev. 03
Example:
RCF display ( RCF )
RPM
t/min:s
PROG
RPM
t/min:s
PROG
RPM
t/min:s
PROG
RPM
t/min:s
PROG
Example:
RCF display ( RCF )
RPM
t/min:s
PROG
EN
RPM
t/min:s
RPM
t/min:s
RPM
t/min:s
RPM
t/min:s
RPM
t/min:s
65/166