Short-Term Centrifugation; Emergency Stop - Hettich MIKRO 185 Mode D'emploi

17.3

Short-term centrifugation

 Press the key to activate the RPM display
RCF
(RPM) or the RCF display ( RCF ) as
needed.

 Enter the desired centrifugation parameters (see the
chapter "Entering centrifugation parameters").

 Press the key and keep it pressed.
START
PULSE
During the centrifugation run, the rotor
speed or the resulting RCF value and
elapsed time are displayed.

 Release the key again to end the
START
PULSE
centrifugation run.
The run-out occurs with the set brake
stage. The brake stage is displayed.
Example f.
18

Emergency Stop

 Press the key twice.
STOP
OPEN
During the Emergency Stop, the run-out
occurs with the "fast" brake stage (short
run-out time). Brake stage
displayed.
AB1203DEENFRIT
Example:
RPM display (RPM)
>RCF< RPM
>RCF< RPM
RPM
>RCF<
RPM
>RCF<
Example:
RPM display (RPM)
>RCF< RPM
f is
Rev. 05 / 05.2020
Example:
RCF display ( RCF )
t/min:s >RCF< RPM
t/min:s >RCF< RPM
RPM
t/min:s >RCF<
RPM
t/min:s >RCF<
Example:
RCF display ( RCF )
t/min:s >RCF< RPM
EN
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
61/146