Querying System Information - Hettich EBA 280 Mode D'emploi

20.1

Querying system information

The following system information can be queried:

Centrifuge model

The maximum speeds of the various rotor codes,

Centrifuge program version

Frequency converter type

Frequency converter program version
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
seconds.

 Press the key.

 Press the key.
START
Centrifuge model.
PULSE

 Press the key.
R : Rotor code of the rotor.
: The rotor code of the currently used
rotor is marked with an asterisk.
RPMmax : The maximum speed of the
rotor permitted for this centrifuge.
 The maximum speeds of the various rotor



codes can be displayed with the keys.
 Press the key.


Centrifuge program version.
 Press the key.


Frequency converter type.
 Press the key.


Frequency converter program version.
 Press the key twice to exit the "
Info"


menu or press three times to exit the "

MACHINE MENU ".
AB1101DEENFRIT
STOP
key.
OPEN
PROG RPM t/min:s
PROG RPM t/min:s
PROG RPM t/min:s
Example:
PROG RPM t/min:s
Example:


Example:


Example:


Example:


PROG RPM t/min:s
Rev. 03
EN
PROG RPM t/min:s
Example:
PROG RPM t/min:s
69/166