Palazzetti ECOFIRE TWIGGY Notice D'installation Et D'entretien page 49

6.2.2 Single wall pipe and room air intake
In this case the combustion air will be drawn
from the environment (Fig. 18).
To achieve this:
• Remove the coaxial pipe.
• Join the aesthetic collar (A) to the support ring
(B) using the 6 nuts supplied and align the as-
sembly with the top by adjusting the nuts.
• Connect the smoke outlet pipe (C).
C
A
B
6.2.3 Single wall pipe and air intake
connected to the outside
In this case the combustion air will be taken di-
rectly from outside via the rear of the stove.
After carrying out the operations in the para-
graph Single wall pipe and room air intake:
• Open the door and turn the screws to remove
the left side (A - Fig. 19).
• Remove the combustion air connection hose
(B) and insert the 90° bend (C) supplied in its
place (Fig. 20).
• Remove the pre-cut sheet metal (D) from the
back plate. Connect the combustion air hose
(B) to the 90° bend, passing it through the free
hole in the back plate and then connecting it to
an external air intake. Connect the smoke out-
let pipe (F - Fig. 21).
• Refit the left side.
004771070 - 17/11/2020
ITALIANO ENGLISH
Fig. 18
DEUTSCH FRANÇAIS
F
D
B
ESPAÑOL
A
Fig. 19
C
B
Fig. 20
Fig. 21
49