Ref / Legend - Bien-Air Dental MC3 LED Mode D'emploi

REF Legend
1600680-001 MC3 LED micromotor with internal spray and light
with LED
1600077-001 MC3 LK micromotor with internal spray and light
with bulb
1600071-001 MC3 IR micromotor with internal spray, without light
1500037-010/ Carbon brushes
211.75.08-010
1300132-010/ O-Ring
705.02.66-010
1300145-010/ O-Ring
011.35.28-010
1300155-010/ Flat seal
011.75.87-010
1300148-001/ Sleeve MC3 LK, IR
011.75.43-001
1300105-001/ Protective sleeve
011.75.46-001
1300097-001/ Rear sleeve
011.75.37-001
1500007-005 Pack of 5 bulbs, for micromotors
1600307-001 Flow-meter for micromotors MC3
1600097-001 Hose 4VLM Grey, fixed connector, with air flow return (L=2m)
1600102-001 Hose 4VLM Grey, fixed connector without air flow return (L=2m)
1600098-001 Hose 4VLM Black, fixed connector with air flow return (L=2m)
1600103-001 Hose 4VLM Black, fixed connector without air flow return (L=2m)
1600397-001 Hose 4VR Grey, Rotating connector, with air flow return (L=2m)
1600398-001 Hose 4VR Grey, Rotating connector, quick connector unit side,
with air flow return (L=2m)
Set supplied
a
See cover page.
Optional components
b
See cover page.
List of Bien-Air Dental SA registered trade mark products ®:
Aquilon ® Eolia ®
Bora ® Gyro ®
Boralina ® Gyrolina ®
ChiroPro ® Isolite ®
In these instructions, "Device" corresponds to the product described in the
heading "Identification". For example, turbine, contra-angle, handpiece,
micromotor, tube, electronics, connectors, station etc.
Symbols
Manufacturer.
Attention.
Wear rubber gloves.
Sterilisable at the specified
temperature.
Light.
Lubrifluid ® Prestilina ®
Lubrimed ® Spraynet ®
MX ®
PowerCare ®
CE Marking with number
of the notified body.
Recyclable electrical and
electronic material.
Move in the
direction indicated.
Move fully to the
stop, in the direction
indicated.
6 6 6