Installation; Signal Connections; Technical Specifications; Options And Accessories - ADB TANGO 24 Manuel D'instruction

Lighting Technologies

Installation

TANGO is a professional lighting control desk, developed as per EN60950 safety standard. It is
a class 1 equipment designed and manufactured to EN60950.
To prevent any risk of electric shock do not open the desk, there are no user serviceable parts
inside. Refer servicing to trained service personnel exclusively.

Signal Connections

To enhance safety and operating reliability this product has been fitted with galvanic isolation on
the DMX512/1990 output. This isolation has been tested for 500V dc in order to prevent grounding
loop problems or to transfer low voltages occasionally present on some signals to controls or
other signal connectors accessible to the user.
It is absolutely forbidden to apply any voltage to the connections of TANGO (Remote and DMX).
Connections to inappropriate sources may inadvertently damage TANGO and may be dangerous
to the user. It is the user's responsibility to use the equipment for it's intended purpose and to
check the equipement connected to it.
TANGO is a professional piece of equipment developed with simplicity of use in mind. However,
in order to fully benefit from the designed in safety features, the equipment shall be installed and
serviced by skilled and trained personnel exclusively.

Technical Specifications

Power supply : 230 V +/- 10%, 50/60 Hz.
Mechanical dimensions (mm) (width x depth x height) :
TANGO 24
Packed 650 x 340 x 130
Unpacked 620 x 315 x 118

Options and Accessories

• 128K memory card for permanent storage
• Dust cover for TANGO 24
• Dust cover for TANGO 48
• Flight case for TANGO 24
• Flight case for TANGO 48
DMX512/1990
GND 1 O
DATA - 2 O
DATA + 3 O
4 O
5 O
XLR5-MX
2
Cable : 2 x 2 x 0.34 mm shielded
Max. length : 250 m
TANGO 48
860 x 340 x 130
815 x 315 x 118
TANGO
O 1 GND
O 2 DATA -
O 3 DATA +
O 4
O 5
dimmer dependent
Page
Revision : 004
5