Working With Submasters; Selecting The Submaster Mode; Recording A Submaster - ADB TANGO 24 Manuel D'instruction

Pupitre d'éclairage
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

< QUIT
subm. YES >
< MORE
subm. NO >
Lighting Technologies

Working with Submasters

Selecting the Submaster Mode

The last menu page offers the possibility to switch the desk into submaster mode.
The standard mode (factory setting) is 'Submasters OFF'.
To enter the last menu page: MENU, 7 x MORE.
Use the RECORD NEXT button (Submasters YES) to select the submaster mode.
Once this mode is selected, TANGO's manual faders offer a double functionality
in combination with the button AUX:
AUX LED off: faders operate as manual faders
AUX LED on: faders operate as submaster faders
The AUX key can be used to toggle between the two fader functionalities.
In submaster mode, TANGO offers 24 / 48 submasters, depending on the desk
version (TANGO 24/48).
Once the submaster mode is selected, the desk only works in '1 preset' mode.

Recording a Submaster

When a lighting cue is prepared manually via the individual faders (AUX LED off),
it can be stored into a submaster by pushing the RECORD button (first) and
simultaneously the corresponding submaster flash button.
Immediately when the RECORD key is pressed, the individual channel LEDs
indicate which submaster is already occupied and which not. This helps to avoid
to overwrite existing submaster contents. Nevertheless, if an existing submaster
shall be overwritten this can be done by confirming the record procedure by
pushing on the correspondant flash key.
If an existing memory shall be copied into a submaster, select the corresponding
work memory by using the button RECORD NEXT and RECORD LAST, then
push the button INSERT (first) and the corresponding submaster flash button
simultaneously. Immediately when the INSERT key is pressed the individual channel
LEDs indicate which submaster is already occupied and which not. This helps to
avoid to overwrite existing submaster contents. Nevertheless, if an existing
submaster shall be overwritten this can be done by confirming the record
procedure by pushing on the correspondant flash key.
TANGO
Page
25
Revision : 004

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tango 48Tango 24

Table des Matières