Configuring The Desk; Switching On - ADB TANGO 24 Manuel D'instruction

TANGO

Configuring the Desk

Switching ON

Powering up the desk will cause the internal function check to be carried out. While this is
happening the software version number will appear on the display. The current status indicators
will then appear on the screen to show that the desk is fully operational and ready for use. If this
does not happen refer to the section "in case of difficulty" of this manual.
If this is the first time that the desk has been used, it will come on with the original configuration.This
configuartion is remembered when the desk is switched off, and will be used next time the desk
is switched on. To change the configuration refer to the section "Configuring the desk" of this
manual.
Page 8
Revision : 004
Lighting Technologies