Troubleshooting; Cleaning And Maintenance - TOOLCRAFT LDM 60J Mode D'emploi

23. Troubleshooting

Code Cause
Reflected signal too
01
strong
Measurement range
02
exceeded
Reflected signal
03
too weak
06 Batteries weak

24. Cleaning and maintenance

• Never submerge the product in water or other liquids.
• The product is maintenance-free. Clean the device housing using
only a soft, dry cloth or brush. To clean the measurement sensor,
use a small brush or cotton swab.
• Never use any aggressive solvents or chemical solutions as these
may cause damage to the housing surface.
• Store and transport the measurement device in the provided bag
only.
58
Solution
Select another measurement
surface or attach a sheet of white
paper to the surface.
Observe the correct measurement
range.
Select another measurement
surface or attach a sheet of white
paper to the surface.
Replace the batteries.