TOOLCRAFT LDM 60J Mode D'emploi page 37

Laser
• When operating the laser equipment, always make sure that the
laser beam is directed so that no one is in the projection area and
that unintentionally reflected beams (e.g. from reflective objects)
cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reflection
enters unprotected eyes. Therefore, before using the laser
equipment, familiarise yourself with the statutory regulations and
instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or
animals. Laser radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and
move your head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue
to carry out tasks with safety implications, such as working with
machines, working from great heights or close to high voltage.
Also, do not operate any vehicles until the irritation has completely
subsided.
• Do not point the laser beam at mirrors or other reflective surfaces.
The uncontrolled, reflected beam may strike people or animals.
• Never open the device. Setting or maintenance tasks must only
be executed by a trained specialist familiar with potential hazards.
Improperly executed adjustments might result in dangerous laser
radiation.
• The product is equipped with a class 2 laser. Laser signs in different
languages are included in the package. If the sign on the laser is not
written in the language of your country, please affix the appropriate
sign onto the laser.
37