Recalling Saved Measurements; Tips And Notes - TOOLCRAFT LDM 60J Mode D'emploi

21. Recalling saved measurements

• The last 30 measurements are saved automatically.
• Once all 30 memory slots are assigned, the oldest measurement will
be deleted. The latest measurement will be saved on memory slot 1.
• In order to recall saved measurements, briefly press the
save button (E).
Press the +/- button (G) or the save button, in order to recall the
•
memory slots in ascending order.
• If you want to delete any data, recall the respective memory slot and
press and hold the save button for approx. 2 seconds.

22. Tips and notes

• Light refraction and sunlight can cause measuring errors during
outdoor use. Perform measurements under suitable light conditions.
• When using the product outdoors, protect it from moisture and
humidity.
• The following surfaces can affect the measurement due to their
physical characteristics:
- Transparent surfaces (e.g. glass, water)
- Reflecting surfaces (e.g. glass, shiny metals)
- Porous surfaces (e.g. insulating materials)
- Structured surfaces (e.g. roughcast, natural stone)
• The product features a 6.35 mm (1/4") tripod thread on its backside,
allowing the product to be mounted to a suitable tripod.
• Attach the hand strap to the eyelet located in the lower right area
of the housing.
• In order to delete the latest measured reading when measuring,
briefly press the C/OFF button (F).
57