TOOLCRAFT LDM 60J Mode D'emploi page 55

2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Now measure the two necessary lengths. In regard to the right order,
refer to the following picture.
4. Measure the first distance. The reading is shown in the violet line.
5. Measure the second distance. The reading is shown in the blue line.
6. The height between points 1 and 2 is calculated automatically and
is shown in the bottom line. The angle between the two distances is
shown in the white line.
With one reference point and protractor
1. Press the indirect measurement button (H) six times. A rectangular
triangle with angle symbol appears left in the display. The current
inclined angle of the product is shown in the white line.
55