Continuous Measurement - TOOLCRAFT LDM 60J Mode D'emploi

3. Measure the second value. The difference of both measurements is
shown in the lower line. The reading measured last is shown in the
line directly above the difference.
4. Follow the steps described above to subtract further measurements.

14. Continuous measurement

1. Press and hold the ON/DIST button (C) for approx. two seconds.
2. The targeting laser (B) is activated. The distance is measured
continuously.
3. The display shows the maximum, minimum and last registered value
of the measurement process.
46
1 2
2.387 m
2.000 m
0.387
1 2
4.000 m
min
5.000 m
max
4.500
1 2
m m
1 2
m m