Area Measurement (Rectangles); Volume Measurement - TOOLCRAFT LDM 60J Mode D'emploi

4. Press the ON/DIST button, in order to finish continuous measuring.
The measurement values remain visible.

15. Area measurement (rectangles)

1. Press the area measurement button (I) once. A rectangle appears
left in the display.
2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Measure the first side length. The reading is shown in the violet line.
4. Measure the second side length. The reading is shown in the blue
line.
5. The device multiplies both readings automatically. The total area is
shown in the bottom line.

16. Volume measurement

1. Press the area measurement button (I) twice. A cuboid appears left
in the display.
1 2
1 2
m m
m
m
47