TOOLCRAFT LDM 60J Mode D'emploi page 52

4. Measure the first distance. The reading is shown in the violet line.
5. Measure the second distance. Maintain a right angle. The reading is
shown in the blue line.
6. The height is calculated automatically and is shown in the bottom
line.
With three reference points (total height)
1. Press the indirect measurement button (H) three times. A triangle
separated in the middle appears left in the display.
2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Now measure the three necessary lengths. In regard to the right
order, refer to the following picture.
52
1 2
1 2
m m
m
m
m