Area Measurement (Rectangular Trapezoid) - TOOLCRAFT LDM 60J Mode D'emploi

2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Measure the first side length. The reading is shown in the white line.
4. Measure the second side length. The reading is shown in the violet
line.
5. Measure the third side length. The reading is shown in the blue line.
6. The device calculates the area automatically. The total area is shown
in the bottom line.
18. Area measurement (rectangular
trapezoid)
Measure the three sides that are perpendicular to each
other.
1. Press the area measurement button (I) four times. A rectangular
trapezoid appears left in the display.
2. Activate the target laser (B) by pressing the ON/DIST button (C).
3. Measure the first side length. The reading is shown in the white line.
4. Measure the second side length. The reading is shown in the violet
line.
1 2
1 2
m m
m
m
m
49