Settings; Measurement Reference - TOOLCRAFT LDM 60J Mode D'emploi

3. If necessary, press the C/OFF button (F), in order to deactivate the
target laser.
4. Press and hold the C/OFF button for approx. two seconds to turn
the device off.
The whole device will turn off after five minutes of
inactivity.

9. Settings

Unit
• Press and hold the UNITS button (D) for approx. two seconds, in
order to change the unit.
• The corresponding indicator is displayed right next to the
measurement value.
• The following units are available:
Length
Area
Volume
Inch readings can be displayed with fractions or with
decimal places.

Measurement reference

Press the UNITS button (D) to change the measurement reference.
•
• The following measurement references are available:
• Starting point: Front of the device
Meter Inch
m
m²
m³
Foot
in ft
ft² ft²
ft³ ft³
0'00" 1/16
0'00" 1/16
ft
2
ft
3
43