Turning The Device On/Off; Measurement Reference - TOOLCRAFT LDM 15J Mode D'emploi

8. Turning the device on/off

1. Press the ON/DIST button (C) to turn on the device. The target
laser (B) will be activated directly. The display shows the stand-by
screen. The laser indicator (3) starts flashing. The signal strength
indicator (2) lights up steadily.
2. Press and hold the C/OFF button (D) for approx. 2 seconds to turn
off the device.
The laser will be deactivated after approx. 20 seconds
of inactivity.
The device will turn off automatically after approx.
5 minutes of inactivity.

9. Measurement reference

Press the C/OFF button (D) to change the measurement reference.
•
• The following measurement references are available:
• Starting point: Back of the device
• The device length is included in the measurement.
• Starting point: Front of the device
29