Output Configuration; Introduction; Change The Settings - Gorgy Timing LEDI NETWORK TOP Série Mode D'emploi

2.2. OUtPUt COnFIGURatIOn

2.2.1. Introduction

Your LEDI NETWORK TOP is provided with a static relay output which provides a
configurable pulse tightly synchronized on the NTP time code received from the NTP
server.
If there are another Gorgy-Timing devices on your installation, you can freely use and
copy the table Devices configuration in "section 10. Additional documents".

2.2.2. Change the settings

Open the WEB site of the LEDI NETWORK TOP (see part 4.2.5).
Click on the
the screen :
In this screen you can change the pulse settings. Then click on the
button. The modification should appears immediately on the output.
MDE-LEDInetworkTOP-4092-V1.1
button. The current configuration of your product appears on
53