Assembly Instructions - Skandika Fitness Triton SF-1961 Instructions De Montage Et Mode D'emploi

Assembly instructions

Step 1
Attach the front stabilizer (7) to the front
part of the main frame (8) with 2 bolts (48),
2 curved washers (69), 2 spring washers
(68) and 2 nuts (54).
Step 2
Insert pedal shaft (12) into main frame (8)
and attach the pedals (25/26) with Allen
screws (55) and flat washers (65).
Step 3
Slide the seat (5) into the sliding rail
(3) and attach the pads (16) with Allen
screws (57), flat washers (65) and nuts
(52). Put end cap (17) onto the sliding rail
(3).
Step 4
Put decoration cover (24) onto sliding
rail (3) as shown in figure A.
Connect lower wire (70) and upper
wire (71).
Fix sliding rail (3) on main frame (8)
with 2 Allen screws (57), 2 spring
washers (68) and 2 flat washers (65).
Attach surface plate (14) to sliding rail
(3) with 2 Allen screws (57), 2 spring
washers (68) and 2 flat washers (65).
Finally press down the decoration cover
(24) as shown in figure B.
24