Assembly Instructions - Skandika Fitness HELIOS SF-1900 Instructions De Montage Et Mode D'emploi

Assembly instructions

Step 1
1. Attach the Front Stabilizer (18) to
the front part of the Main Frame (1)
with Allen Bolts (20) and Washers
(19).
2. Attach the Rear Stabilizer (24) to the
rear part of the Main Frame (1) with
Allen Bolts (25) and Washers (26).
Step 2
1. Slide the Protective Guard (13) onto the
Handlebar Post (11);
2. Connect the Lower Sensor Wire (14) to
the Extension Sensor Wire (12) and fix
the Handlebar Post (11) on Main Frame
(1) using the Allen Bolts (7), Spring
Washers (36) and Flat Washers (15) as
shown. Slide down the Protective Gu-
ard (13) and fit in place.
Step 3
Attach the right pedal (21R) onto the
right crank (22R) and tighten it by tur-
ning it clockwise.
Then attach the left pedal (21L) onto
the left crank (22L) and tighten it by
turning it anticlockwise.
The pedals are marked with "R" (right)
and "L" (left).
22