Description; Instrument Overview - MSA ALTAIR 5 Manuel D'utilisation

2. Description

2.1. Instrument Overview

1 LEDs (2 red "Alarm", 1 green "Safe")
2 MSA LINK Communication
3 Sensor Inlets (Diffusion version)
4 Pump Cap (Pump version)
5 Horn
6 Display
7 ▲ Button
8 Button
The instrument monitors gases in ambient air and in the workplace.
The ALTAIR 5 is available with a maximum of four sensors, which can
display readings for five separate gases (one Dual Toxic Sensor
provides both CO and H 2 S sensing capabilities in a single package).
The detector is available in a diffusion or pumped configuration. When
using the pumped instrument, do not remove the pump cap
(item 4 on FIGURE 2-1).
Figure 2-1. Instrument View
.
9 ▼ Button
10 Belt Clip (Altair 5 only)
11 Charging Port
12 Screws
13 Pump inlet
14 Filter
15 Charge Status LED
2-1