MSA ALTAIR 5 Manuel D'utilisation page 43

NOTE: The time can be set for either regular AM/PM or military time
through MSA Link software. AM/PM time is the default setting.
1. Press the
2. Change hours by pressing the ▼ or ▲ button.
Increment through noon for PM hours.
3. Confirm by pressing the
4. Change minutes by pressing the ▼ or ▲ button.
5. Confirm by pressing the
• The instrument goes to the Set Date Page.
6. Change month, date, and hours by pressing the ▼ or ▲ button:
7. confirming by pressing the
• The instrument goes to the next Setup Page.
Setting Datalog Intervals
This option is for setting the intervals at which all the readings
are logged.
1. Press the
2. Change interval by pressing the ▼ or ▲ button.
3. Confirm by pressing the
• The instrument goes to the next Setup Page.
Setting Stealth Mode
Stealth mode disables the visual, audible and vibrating alarms.
1. Press the
2. Press the ▼ button to go to the ▲ button to return to the
previous page.
Setting Confirmation Beep
1. Press the
2. Press the ▼ button to go to the ▲ button to return to the
previous page.
Setting Contrast (monochrome display)
1. Press the ▼ or ▲ button to adjust the contrast levels.
2. Press the
button to enter setup.
button.
button.
button to enter Setup.
button.
button to change mode (ON/OFF).
button to change mode (ON/OFF).
button to confirm the contrast level.
button.
3-13