Mafell NFU 50 Consignes D'utilisation/De Sécurité page 9

NFU 50
2.5 Intended use
The machine is designed exclusively for processing wood and wood panel materials.
Insulation boards, Styrodur and rigid polyurethane foam can also be processed.
The machine is used to produce grooves, birthmouths, tenons, and halved joints in the above materials.
All work requires a secure support on the workpiece. The machine can be used with or without guiding devices.
When working with different special accessories, be sure to comply with the respective information in these
operating instructions. They are a part of the intended use.
Any use other than the intended use listed above is not permitted. The manufacturer is not liable for any
damage resulting from such other use.
Using the machine as intended requires compliance with the MAFELL-specified terms of operation,
maintenance, and repair.
2.6 Foreseeable misuse
Foreseeable misuse includes:
- Tampering with, removing and/or bypassing safety devices of any kind.
- Operating the machine without safety devices.
- Non-observance of safety and warning instructions in the operating instructions.
- Removing the safety and warning labels from the machine.
- Operating the machine by unauthorized persons.
- Failure to follow prescribed maintenance and care instructions.
- Using the machine with third-party tools. Only the tools suggested by MAFELL are allowed.
- Using the machine for dipping into materials and reverse milling.
12/2024 9