Publicité
3. Place the suction hose along with the
drain pipe in a container of water.
5. Plug the generator into a grounded cable
outlet.
7. Tighten the pressure regulator clockwise
until the desired value is reached.
9. Transfer the 2 pipes to the paint container
and submerge them completely.
11. When you see paint coming out of the
drain tube:
•
Point the gun at the waste bin.
•
Unlock the pistol trigger lock.
•
Pull and hold the trigger of the
gun.
•
Rotate the work valve to the
spray position.
18
4. The operating valve should first be set
vertically downwards in the overflow
position.
6. Turn on the device.
8. Turn off the power switch.
10. Turn the power switch (ON).
12. Continue to keep the gun pointed at the
waste bin until you see that only paint is
coming out of the gun.
WABRO Sp. z o. o.
NIP: 6263044765 | Regon: 52012826
ul. Arki Bożka 2A, Bytom
Publicité
