Publicité
1
Filter housing
(collector filter inside**)
2
Digital Pressure
Display(Under Cover)
3
Pressure Regulator
4
Work Valve
5
Pump (piston rod and
V** seal inside)
6
Suction Pipe
Suction hose*
Suction filter
7
Hose / overflow pipe
8
2x hose outlet
9
Handle
14
2. WT 60 CONSTRUCTION
The manifold filter reduces nozzle clogging.
WT60 and larger models with digital pressure display.
It allows you to adjust the pressure to different demands.
●The valve in the downward-facing position triggers the overflow work from
the suction pipe to the discharge pipe.
●A valve in a parallel position directs the pressurized material to the painting
hose.
●Automatically relieves pressure system in case of over-pressure situation
He pulls the material and pushes it into the hose. Drains fluid from the system
when depressurizing.
It takes the material from the paint container to the pump (the pipe must be
screwed tightly, otherwise the air will get inside, so the pressure will not be able
to reach the desired high level).
The suction filter reduces the possibility of clogging the nozzle and the ingress
of contaminants into the system
The material is extracted from it during washing
Allows you to connect a paint hose
Makes it easy to transport
WABRO Sp. z o. o.
ul. Arki Bożka 2A, Bytom
NIP: 6263044765 | Regon: 52012826
Publicité
