Publicité
" i
"'j
. VC' ■ '■ ' >■■■
\ \
^ \ I
f'
BYPAS
System Mode
Pedal Settings
This function makes settings for receiving
data from the pedal(s).
FUNCTION A
button: Selects the
pedal configuration.
FUNCTION B
Dutton: Memorizes the
setting for when the pedal is in the
"up" position.
FUNCTION C button:
Memorizes the
setting for when the pedal is in the
"down" position.
Pedal configurations
.oaf igu ration
"Up"
"Down"
position
position
Performs the
—
program up
function.
Performs the
program down
PDL1 real time
control.
Switches bypass
on and off.
MIDI 1 Settings
Sets basic MIDI functions.
FUNCTION A button:
Sets OMNI
on or off.
FUNCTION B button:
Sets the
MIDI channel.
Note:
When transmitting bulk data, be sure
the MIDI channels are the same. For
example, even with OMNI set to ON,
data cannot be transmitted if
different MIDI channels are used for
sending and receiving.
FUNCTION C button:
Sets the
memory number corresponding
to the MIDI program change
number l~lz8.
FUNCTION A button: Sets the
MIDIprogram change number.
FUNCTION B button: Sets the
memory number.
FUNCTION D button:
Transmits
bulk dump data.
FUNCTION A button: Selects the
type of bulk dump data to transmit.
FUNCTION B button: Starts
transmission.
FUNCTION E button:
Receives bulk
dump data.
This mode enables bulk dump dala
to be input.
•
The signal lamp lights red when bulk
dump data is being received.
MIDI 2 Settings
Configures settings tor receiving MIDI
data.
Sets basic MIDI functions.
FUNCTION A button:
Sets program
change receiving on or oil.
FUNCTION B button:
Sets control
change receiving on or off.
FUNCTION C button:
Sets channel
pressure receiv ing on orotf.
FUNCTION D button: Set> pitch
bend control receiving on or on.
58
Publicité
