Publicité
System Mode
2
,
3
1
4
SVSTEN:Select_
m
ei £}?■
&>
^
tSETLP][CLQCK)[KErlRVl[PEDflL)[HIDI l][t1IDI2]
CD-QDCD-CD-CD CD
-FUNCTION —
—
i®- 111
:.'§U
CD CD CD CD CD-CD
-FUNCTION-----
i'
CD CD CD CD CD CD
-FUNCTION-
This mode is used to configure the unit's
six
main operation environments. To return to
the previous screen during setup, press th<-
EXIT button. To return to the play mode
(PLAY screen) after finishing making
settings, press the EXIT button a few times
until you return to the play mode (PLAY
screen).
1 Press the SYSTEM button.
The SYSTEM screen is displayed.
2
Select the function you want to
set by pressing the corresponding
FUNCTION (A F) button.
FUNCTION A button:
Sets the setup
function. The "SYSTEM: Set Up"
screen is displayed. (See page 54)
FUNCTION B button:
Sets the time.
The "System: Clock" screen is
displayed. (See page 54)
FUNCTION C button:
Edits tl le usei
memory. The "SYSTEM: Memory"
screen is displayed. (See page 56)
FUNCTION D button:
Sets the pedal
settings. The "SYSTEM: Pedal"
screen is displayed. (See page 58)
FUNCTION E button:
Sets the MIDI 1
settings. The "SYSTEM: MIDI
BASIC" screen is displayed. (See
page 58)
FUNCTION F button:
Sets the MIDI 2
settings. The "SYSTEM: MIDI RX-
SW" screen is displayed. (See page
58)
3
Select the item you want to set
from the screen displayed in step
2 by pressing the corresponding
FUNCTION (A-F) button.
4
Turn the operation dial or use the
shuttle ring to adjust or change
the setting.
52
Publicité
