Publicité
Names and
Function
to PEDAL
vers PEDAL
an PEDAL
to PEDAL
vers PEDAL
an PEDAL
Expression pedal
Pedale d'expression
Expression-Pedal
Conventional volume pedal
Pedale de volume classique
Konventionelles-Pedal
fl~j REMOTE IN Terminal
For connecting the HR-RC5 dedicated
remote controller (sold separate!) ;.
Connecting the remote controller enables
you to perform panel operations from a
distance.
[2]
MIDI OUT Terminal
Outputs MIDI signals.
[3]
MIDI IN Terminal
Inputs MIDI signals. Use a commercially
available MIDI cable to connect 111 is
terminal to another MIDI component's
MIDI OUT (or THRU) terminal.
0] OUTPUT CH1/CH2 Jacks (Standard
Jacks}
Standard output jacks for channel 1 and
channel 2.
f5~]
PEDAL Input Jack (Standard Jack)
Standard input jack tor pedal switch or
pedal volume.
Note:
When connecting a pedal, be sure to use
a pedal with a resistance value of 20k
ohms or greater. Pedals with lower
resistance values may not provide the
desired effect.
Use an expression pedal or a
conventional mechanical volume pedal.
When connecting a volume pedal,
connect the cable to the pedal's "out"
jack. Do not connect anything to the
pedal's "in" jack.
Electronic volume pedals cannot be used.
BU INPUT Jack (Standard Jack)
Jack for low impedance input. When
using a input source through other
effecters, pre-amplifier or wireless
system, connect the input cable to this
_jack.
[ZJ
DC IN Jack
For connecting this unit to a power outlet
using the supplied AC adapter.
14
Publicité
