Publicité
System Mode
Configuring the Setup
Function
Three settings arc possible on the
"SYSTEM: Set Up" screen.
FUNCTION A button:
Adjusts the
display window contrast.
FUNCTION B button:
Selects the
display mode.
It "NAME" is selected, the screen
displays only the memory location
name
in
large characters.
If "INFO" is selected, the screen
displays the memory name in regular
characters as well as information
such as the date the memory contents
were created and whether the
memory contents are
protected
or
not.
FUNCTION C button:
Selects the load
form.
Tf "AT ITO" ic coierteH
effect is
ring is used to change the memory
number in play mode.
If "ENTER" is selected, effects are
recalled from memory in play mode
by using the operation dial or shuttle
ring to change the memory number
and then pressing the FUNCTION F
button. By pressing the FUNCTION
A button before pressing the
FUNCTION F button, you can check
which effect is in the selected
memory location before recalling it.
FUNCTION D button:
Selects the
amplifier simulator mode.
If OFF" is selected, the settings of the
amplifier simulator are automatically
canceled regardless of the settings
stored in each memory and "AMP OFF"
appears on the play mode display.
If "PGM" is selected, the settings of the
amplifier simulator are set to the values
stored in memory.
Setting the Time
This function is used to set the time and
date of this unit's built-in dock. Once the
duck is set,
the
time
is
automatically
stored
in the user memory when you create and
save an effect.
FUNCTION A button:
Sets the Month.
FUNCTION B button:
Sots the Day
FUNCTION C button:
Sets the Year
FUNCTION D button:
Sets the Hour.
FUNCTION E button:
Sets the Minute
FUNCTION F button:
Starts the clock
after the settings are completed.
Publicité
