Publicité
Names and
Function
Frontpanel
|T]
INPUT Jack
Jack for high impedance input. When
connecting a guitar or a bass guitar
directly, connect the input cable
to this
jack.
E POWER Switch/Input Level
Adjustment Knob
Press this switch to turn the power on
and off. When the power comes on, the
backlight illuminates the display window
and the contents of memory saved when
the power was last turned off are
recalled.
Turn the knob to the left or right to adjust
the input level.
E SIGNAL Lamp
This LED lights green, orange or red
depending on the strength of the input or
output level. Adjust the level so that the
lamp does not continuously stay red.
(See page 18)
[4] Display Window
This window displays various
information such as the recalled memory
address name, parameter setting values
and messages.
E SAVE Button
When you create an original effect by
changing parameters, press this button to
save the effect in the user memory area.
(See page 48)
E BYPASS Button
Pressing this button cuts the effect by
routing the signal around the effect
processing circuitry so that the input
signal is output unchanged.
[71 Operation Dial/Shuttle Ring
Used for various operations such as
selecting memory address numbers and
parameters and making parameter
settings. The operation dial is used Un¬
changing the setting value in one step
increments, and the shuttle ring is used
for rapidly increasing or decreasing the
setting value. The speed of change varies
according to the angle of the shuttle ring
E|
SYSTEM Button
Sets the unit's operating environment.
(See page 52)
[9]
EXIT Button
Press after or during a setting procedure
to return to the previous screen or mode
10
Publicité
