Publicité
BEFORE OPERATION
NOTE: Become familiar with how to operate the
mower deck and understand safety instruc-
tions in this manual and the tractor's manual.
IMPORTANT: The machine is equipped with vari-
ous safety systems. All safety shields,
guards, and covers should always be
in position and functioning properly.
Lost or damaged ones should be re-
placed with a new ISEKI genuine part.
Especially before starting the opera-
tion, check that no bolts used on the
mower deck nor blades are worn,
damaged or loose. Replace worn or
damaged bolts and blade as an as-
sembly to keep the entire balance.
Make sure that the V-belt is tensioned
evenly as specified.
Before moving the tractor into the
working site, check the whole area
and get rid of all obstacles such as
stones, wood, empty tins, bottles,
wires, etc. to ensure safe operation.
Make sure that the mower operation
will not cause any injury to children,
animals, bystander, or damage to
trees, buildings, etc.
FIG. 6-1: The relationship between setting hole and
cutting height is shown in the label on the mower
deck. Select the most suitable cutting height.
Adjust cutting height at the gauge wheels depending
on the ground condition.
FIG. 6-2: Raise the mower deck.
Unlock the clip, 1, and remove the pin, 2, while hold-
ing the gauge wheel by hand.
Select one of the setting holes to get required cutting
height, insert the pin, 2, and lock the clip, 1.
All gauge wheels or rollers should be set to the same
height.
MOWER OPERATION
43
MOWER OPERATION
FIG. 6-1
Publicité
