Publicité
will light up or go out to confirm the selection.
UP
Used to increase (warm) the set temperature by
1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by
1°C/1ºF.
Display
Display the digital temperature and service indicators.
Light Indicator / Multi-key Function
The interior light indicator is the dot at the bottom right
of the display. The interior light indicator will light up in
showcase mode.
The interior light indicator will flash when the multi-key
function is selected. To perform the multi-key function,
lightly touch and hold the first key, then touch the rest
key for at least 5 seconds and then release all the keys.
Child Lock
If in 2 minutes or longer without touching any key, the
child lock will be activated automatically for models
with the control outside of cabinet. To cancel the lock,
touch the UP and DOWN keys
least 5 seconds.
Setting the Temperature Control
The unit has a single adjustable temperature zone.
The temperature can be set between 5ºC and
20ºC (41ºF and 68ºF). It can be used as a wine
maturing cabinet or a wine serving cabinet. The
recommended temperature setting range for
maturing wine is between 11ºC and 14ºC (52ºF
and 57ºF). The recommended temperature setting
range for serving white wine is between 5ºC and
10ºC (41ºF and 50ºF) and the recommended
temperature setting range for serving red wine is
between 15ºC and 20ºC (58ºF and 68ºF).
When the unit is plugged in for the first time, the
unit will power up automatically to the preset
defaults. The temperature preset at the factory is
12°C (54ºF) (ideal maturing temperature).
You can set the temperature as required by
touching the UP or DOWN key. When you touch
either key at the first time, the display will show the
last temperature set previously. The temperature
will increase 1°C/1ºF if you touch the UP key once,
or the temperature will decrease 1°C/1ºF if you
touch the DOWN key once. The display flashes
while you make the setting.
After the temperature has been set, the display
shows the current inner temperature.
To view the set temperature at any time, touch the
UP or DOWN key; the set temperature will
temporarily flash in the display for 5 seconds.
Then the display
temperature again.
Code Rev. E 20240815 (IEC)
simultaneously
for at
shows
the current
inner
USE AND CONTROL – SINGLE ZONE with
LCD DISPLAY
The Controls of Your Unit
POWER
To turn the appliance off, lightly touch and hold the
key for 5 seconds until temperature display goes out.
To turn the appliance on, lightly touch and hold the
key for 1 second until temperature display lights up.
ºF/ºC Selector
Set the temperature to be displayed in degree
Fahrenheit or degree Celsius.
LIGHT
To turn the interior light on/off, lightly touch and hold
the
key for 5 seconds.
UP
Used to increase (warm) the set temperature by
1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by
1°C/1ºF.
Setting Selector
Select the temperature and humidity you want to set.
Symbols in the Display
Temperature or Error code display
Compressor is ON.
Heater is ON.
Defrosting mode.
DynaClima mode.
Eco Demo mode.
The interior light is in Showcase mode.
Warning
Audible tones signal
Child lock is activated
Wifi connection signal
Anti-condensation mode
Relative humidity display
Multi-key Function
To perform the multi-key function, lightly touch and
hold the first key, then touch the rest key for at least 5
seconds and then release all the keys.
Child Lock
If in 2 minutes or longer without touching any key, the
child lock will be activated automatically for models
with the control outside of cabinet. To cancel the lock,
lightly touch the UP and DOWN keys
for at least 5 seconds until the symbol
Setting the Temperature Control
The unit has a single adjustable temperature zone.
The temperature can be set between 5ºC and
14
simultaneously
is go out.
Publicité
