Publicité
40 MW105 & MW106 Portable Meters
Overwriting existing data:
1. When the LCD displays "OVR" with LOT### blinking (USB icon
is displayed), an identical named lot exists on the USB.
2. Press keys to select between YES, NO, YES ALL, NO ALL
(ACCEPT tag blinking).
3. Press GLP/ACCEPT to confirm. Not confirming exits the export.
Display returns to lot selection screen.
USB Export Selected
Logged data can be transferred separately by lots.
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the number of stored logs.
2. Press GLP/ACCEPT to confirm.
3. Use keys to select the lot type (MANUAL, STABILITY or
interval ###)
4. With the lot selected, press RANGE/ to export to USB flash
drive.
LCD displays "PLEASE WAIT" followed by "EXPORTING" with
ACCEPT tag and selected lot name (MAN / STAB / ###) blinking.
LCD displays "EXPORTING" and the percentage counter,
followed by "DONE" when export is completed. Display returns
to the lot selection screen.
Note: The USB flash drive can be safely removed if the USB icon
is not displayed. Do not remove the USB drive during export.
Overwriting existing data:
1. When the LCD displays "EXPORT" with ACCEPT and lot number
blinking (USB icon displayed), an identical named lot exists
on the USB.
2. Press GLP/ACCEPT to continue. LCD displays "OVERWRITE"
with ACCEPT tag blinking.
3. Press GLP/ACCEPT (again) to confirm. Not confirming exits the
export. Display returns to lot selection screen.
Publicité
