Publicité
10.2. DATA MANAGEMENT
A lot contains 1 to 600 log records (saved measurement data)
Maximum number of lots that can be stored is 100, excluding
Manual and Stability
Maximum number of log records that can be stored is 1000,
across all lots
Manual and Stability logs can store up to 200 records (each)
Interval logging sessions (across all 100 lots) can store up to
1000 records. When a logging session exceeds 600 records a
new lot will be created.
Lot name is given by a number, from 001 up to 999. Names
are allocated incrementally, even after some lots have been
deleted. Once lot name 999 was assigned, all lots have to be
deleted, to reset lot naming to 001.
See Deleting Data section.
10.2.1. Viewing Data
1. Press RCL to access the logged data.
LCD displays "PLEASE WAIT" followed by "LOG RECALL" with
ACCEPT tag blinking and the number of stored logs.
Note: Press RANGE/ to export all saved lots to external
storage.
2. Press GLP/ACCEPT to confirm.
3. Use keys to select the lot type (MANUAL, STABILITY or
interval ###).
Note: Press RANGE/ to export only the selected lot to
external storage.
4. Press GLP/ACCEPT to confirm.
5. With a lot selected, use keys to view the records stored
in that lot.
6. Press RANGE/ to view, additional log data: date, time,
cell factor, temperature coefficient, temperature reference,
displayed on the third LCD line.
LOGGING (MW106) 35
Publicité
