Publicité
"WRONG TEMP" is displayed when buffer temperature is out
of range. The calibration buffers are affected by temperature
changes. During calibration, the instrument will automatically
calibrate to the pH value corresponding to the measured
temperature but compensate it to the value of 25 °C.
When "CONTAMINATED BUFFER" is displayed, replace the
buffer with a new one and continue the calibration.
MW106 "VALUE USED BY CUST 1" or "VALUE USED BY CUST 2"
message is displayed when attempting to set a custom buffer
of the same value as the one previously set. Make sure that
set custom buffers have different values.
pH 29
Publicité
