Publicité
7. SETUP
To configure the meter settings, modify default values or set
measurement parameters:
Press SETUP to enter (or exit) Setup mode
Use keys to navigate the menus (view parameters)
Press CAL/EDIT to enter Edit mode (modify parameters)
Press RANGE/ key to select between options
Use keys to modify values (value being modified is
displayed blinking)
Press GLP/ACCEPT to confirm and save changes (ACCEPT tag
is displayed blinking)
Press ESC (or CAL/EDIT again) to exit Edit mode without
saving (return to menu)
7.1. SETUP OPTIONS
Log Type (MW106)
Options: INTERVAL (default), MANUAL or STABILITY
Press RANGE/ to select between options.
Use keys to set time interval: 5 (default), 10, 30 sec. or 1, 2, 5,
15, 30, 60, 120, 180 min.
Use keys to select stability type: fast (default), medium or
accurate.
SETUP 17
Publicité
