Publicité
When connected to a PC, to enable logging:
Press LOG/CLEAR. LCD displays "LOG ON METER" with ACCEPT
tag blinking.
Press GLP/ACCEPT. Meter disconnects from the PC and the PC
icon is no longer displayed.
To return to "EXPORT TO PC" mode, follow steps 2 and 3 above.
Exported data file details:
The CSV file (comma separated values) may be opened with a
text editor or spreadsheet application.
The CSV file encoding is Western Europe (ISO–8859–1).
Field separator may be set as comma or semicolon.
See Separator Type (MW106) in SETUP OPTIONS section.
Interval log files are named PHLOT###, where ### is the lot
number (e.g. PHLOT051).
Manual log file is named PHLOTMAN and stability log file is
named PHLOTSTA.
USB Export All
1. With the meter on, insert a USB flash drive into the micro USB
port located on top of the meter. If the flash drive does not
have a micro USB connector, use an adapter.
2. Press RCL then RANGE/ to select the "EXPORT ALL" option.
3. Press GLP/ACCEPT to confirm.
LCD displays "EXPORTING" and the percentage counter,
followed by "DONE" when export is completed. Display returns
to the lot selection screen.
Note: The USB flash drive can be safely removed if the USB icon
is not displayed. Do not remove the USB drive during export.
LOGGING (MW106) 39
Publicité
