Type 1094 EV
Basic Safety Instructions
3.
Basic safETy
insTrucTiOns
These safety instructions do not make allowance for any
•
contingencies and events which may arise during the installation,
operation and maintenance of the devices.
•
local safety regulations – the operator is responsible for observing
these regulations, also with reference to the installation personnel.
DangEr!
risk of electric shock!
•
Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
•
Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
general hazardous situations.
To prevent injury, ensure:
•
That the system cannot be activated unintentionally.
•
Installatio
n and repair work may be carried out by authorized
technicians only and with the appropriate tools.
•
After an interruption
in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
•
The device may be operated only when in perfect condition and
in consideration of the operating instructions.
•
The general rules of technology apply to application planning
and operation of the device.
noTE!
electrostatic sensitive components / modules!
The device contains electronic components, which react sensi-
tively to electrostatic discharge (ESD). Contact with electrostati-
cally charged persons or objects is hazardous to these compo-
nents. In the worst case scenario, they will be destroyed immedi-
ately or will fail after start-up.
•
Observe the requirements in accordance with EN 61340-5-1
and 5-2 to minimize or avoid the possibility of damage caused by
sudden electrostatic discharge!
•
Also, ensure that you do not touch electronic components when
the power supply voltage is present!
English
7