Basic Safety Instructions - Burkert 2103 Instructions De Service

Basic safety instructions

3. Basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations; the operator is responsible for observing
these regulations, also with reference to the installation personnel.
danger – high pressure!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
risk of electric shock!
• Before reaching into the device, switch off the power supply and
secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
risk of injury when opening the actuator housing!
The actuator contains a tensioned spring. If the actuator housing
is opened, there is a risk of injury from the spring jumping out!
• The actuator housing must not be opened.
All manuals and user guides at all-guides.com
Type 2103
Caution!
risk of burns!
The surface of the device may become hot during long-term
operation.
• Do not touch the device with bare hands.
general hazardous situations.
To prevent injury, ensure that:
• he system cannot be activated unintentionally. T
• Installation and repair work may be carried out by authorised
technicians only and with the appropriate tools.
• After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
• The device may be operated only when in perfect condition and
in consideration of the operating instructions.
• The general rules of technology apply to application planning and
operation of the device.
The diaphragm valve Type 2103 was developed with due
consideration given to accepted safety rules and is state-of-
the-art. However, dangers can still arise.
english
7