Lumie Zest Guide D'utilisation page 13

Wake-up light options
Wake-up light options
This section summarises the options available to let you customise the wake-
up light.
to check a setting
If you're not in wake-up light mode:
•
Press mode.
•
If the alarm is activated (
•
Hold down menu until the display shows the first setting:
•
Press menu to step through the options until the one you want is shown;
see table below.
to change a setting
When the setting you want is shown:
•
Press ▲ or ▼ to step through the alternative options.
•
Press menu to confirm your setting.
•
Either press menu to choose another setting or wait 1 seconds to return to
normal operation.
The following table explains the meaning of each setting:
Default display
a07:00
c13:00
lxxxoo
i
shown on display) press
a07:00
What it sets
Time you want to be
woken up.
Current time.
Final sunrise brightness.
English 1
g
to cancel it.
Options
7:00 am
1:00 pm
0%, 40%, 60%, 80% or
100% maximum brightness